- +91-9879011436
yaminiservices@gmail.com
Oils Recovery System
Leading Manufacturers, Exporters, Wholesaler and Retailer of Oil And Fat Recovery System, Oil Recovery System and Refinery Waste Water Oil Recovery System from Ahmedabad.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Application | Oil Removing |
| Oil Recycle Rate | 50 (l/hr) |
| Length Of Belt | 1400 mm, 1000 mm, 1200 mm |
| Frequency | 50 Hz |
| Phase | 1 |
| Brand Name | Yamini |
| Surface Treatment | Powder Coated |
| Rated Power | 50-300 kW |
| Material | Mild Steel |
Preferred Buyer From
| Location | Anywhere in India |
We are counted amongst the prominent Manufacturers, Suppliers, and Exporters of Oil Fat Recovery System. Our well-reckoned organisation is based in Gujarat, India. It is well- appreciated by the clients for its non-corrosive body, ruggedness, and long operational life. We thoroughly examine our Oil Fat Recovery System on the basis of the stringent quality parameters, to bring about an exceptional quality in our offered system.
Specifications :
- Increases good quality of recovered oil, as it is recovered from any treatments in ETP
- Reduces load on ETP further treatment.
- Increases the cooling tower efficiency, by removing the oil from its water
- Reduces Cooling tower maintenance requirement.
- Saves operators time and efforts to handle dirty water
- With the help of ETP Pre- treatment system – you can reduce the solids load on your ETP.
- Due to the reduction in solids prior to ETP reduces the load on pumps and chemical dosing in further treatments.
- It also helps in downsizing the further treatments and filter presses for solids handling.
Features :
- Non corrosive body
- Ruggedness
- Maintenance free
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Trader |
| Voltage | 240 V |
| Power | 50-300 KW |
| Features | Easy to operate , High performance, Longer service life |
| Brand Name | Yamini |
| Material | Stainless Steel |
| Medium used | Oil |
| Frequency | 50 Hz |
| Temperature Range | 5-80 Degree C |
| Phase | 1 |
Preferred Buyer From
| Location | Anywhere in India |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Country of Origin | India |
| Rated Power | 50-300 kW |
| Automatic Grade | Automatic |
| Brand Name | Yamini |
| Material | Mild Steel |
| Voltage | 240 V |
| Temperature Range | 5-60 Degree C |
Preferred Buyer From
| Location | Anywhere in India |
We are a famed enterprise that is actively committed towards manufacturing and supplying premium quality assortment of Refinery Waste Water Oil Recovery system at reasonable rates.
Specifications:
- Separate oil from wastewater as an industrial pre-treatment system prior to directing the water to sewer or other disposal.
- Separate oil from circulating water or other aqueous phase systems to remove the oils so that the stream can more economically be reused or so that the oil in the water stream does not cause problems elsewhere in the system by fouling heat exchangers or catalysts.
- Separate oil from water so that the water may be purified and reused or recycled.
- Can be used either internally in chemical plants or oil refineries or in plant or refinery outfall streams.
- Industrial pre-treatment of waste streams prior to disposal to sanitary sewer systems
Features:
- Foot Print: Compact, 10% the size and weight of conventional systems. -2 to 24 m3 = 1 to 1.5 m2 area.
- Oil content – single cycle <20 ppm or recycle + DHRR <5ppm in two stage
- Clean water with no chemicals.
- Effluent can be recycled for continuous treatment.
- Lowest cleaning & maintenance bills.
- Lowest repair & parts replacement bills.
- Lowest total ownership cost over 2 to 4 years.
- Ensure discharge compliance.
- Satisfies Regulatory authorities.
- More likely to meet tougher new Regulations.
- You can get on with your business.
- Fully pneumatic.
- Complies with Standards for hazardous Waste Zones
